How to solve PC issues with Windows Safe Mode

[ 0 ] August 30, 2012 |

 

If you’ve been a Windows user for a while, chances that you have encountered the Safe Mode are pretty high. Safe Mode essentially opens up your computer in a limited state, which means not all activities that you’d normally do over the regular mode will be available. The most basic functions that is required for the computer to function work, but not much else. How this helps is identify the problem with your system (especially if it is over one of the essential drivers) and then helps to isolate it and fix it. 

 

This can be tedious if you don’t know just how to go about it. Ideally you should be able to isolate the problem through the simple process of elimination – because the computer exists in a limited state, this should not take as much time as it normally would. This is more manual than you might perhaps like, but then again, Windows has never been the most error-free of software. There’s generally been some glitch or another; but the good news is with Safe Mode you can pretty easily figure the problem out yourself instead of taking it to a technician and wasting time and money. All it needs is a bit of effort.

Here’s how to do it.

1. Open Safe Mode:

The easiest way to get to this is by restarting your computer. As soon as it turns on again, start hitting the F8 key, and if you do this before anything else has a chance to pop, it should take you to the text menu screen. If your computer itself gives you the option of how to start (Start normally, start in safe mode etc), then of course all you need to do is use the cursor keys to choose safe mode. Try to choose Safe Mode with Networking as this will help you figure out where the problem lies. There is also the Safe Mode that uses the Command Prompt. Unless you are very familiar with how DOS works, this is best avoided. If you’re using XP, you can access Safe Mode right from the main frame. Go to Systems Utility and select Boot.ini. Select the Minimal Network option and you have it! With Windows 7 and Vista, the same is called SafeBoot.

windows safe mode menu

2. Use Safe Mode:

Safe Mode takes longer to load. Don’t panic. Because it only loads the essential drivers, you can uninstall a new driver from Device Manager, which should be on My Computer, under Properties. This is of course in case you know the new driver is the problem. If you don’t, you may have to navigate through different hardware that you have before deciding which has the error. This is a manual process. You may have to check each driver, and it is suggested you start from the most recently added one when you begin your detection. If you’ve been experiencing a problem only recently, chances are the bug is in your newest installation. Another way to find where the trouble is by running the anti-virus you may have. Anti viruses work fine with Safe Mode, and will probably help in easier detection!

This article has been brought to you by www.broadbandproviders.com – the leading provider of best values broadband internet. Visit now

Category: PC Tips

About the Author ()

Leave a Reply

(Spamcheck Enabled)